In 1929, an Italian immigrant named John Surico opened the Fairview Block Company in Poughkeepsie, New York. Nearly a hundred years later, the business is still in his family and still operating from the same Poughkeepsie location. What began as a concrete block yard is now Fairview Cast Stone, where John’s grandson Jack Ackert and great-grandson Paul Ackert make cast stone fireplace surrounds and hearths for homeowners, interior designers, and architects across the region.
Plenty of family businesses survive a century by staying the same. Fairview has survived by changing whenever the market did, and in 2024 they invited Jeff Girard into their shop to help them take their casting to the next level. The result was one of the most-watched videos The Concrete Countertop Institute has ever posted, and you can watch it below.

Great-grandson Paul Ackert and grandson Jack Ackert continue the Fairview legacy.
From Block Company to Cast Stone
The original Fairview Block Company made concrete block and precast concrete products, and it sold the brick, stone, cement, and other materials masons needed to build fireplaces. For years it supplied masons, home builders, and condominium developers throughout New York’s Hudson Valley and in Fairfield and Litchfield Counties in Connecticut.
As factory-built fireplaces took hold, the family started Fairview Hearthside Distributors to sell and install wood-burning and gas fireplaces. Eventually they closed the masonry side of the business and focused on hearth products, which put them in front of a steady stream of customers who needed something beautiful to surround a new firebox. That’s what led to Fairview Cast Stone, which makes fiber-reinforced cast stone surrounds and hearths for wood-burning, gas, and electric fireplaces in a range of colors, textures, and finishes.
You can read the family’s own telling of this history on Fairview’s website.
Bringing Jeff Into the Shop
In August 2024, Jeff Girard traveled to Poughkeepsie to do an on-site training for Paul and his crew. They needed a more consistent mix and methodology, and direct cast GFRC made with Integrity PowerBlend was just the ticket. PowerBlend is the all-in-one concrete mix developed by Jeff. In the training, Jeff and the Fairview team cast a typical fireplace surround, which Fairview makes about 6 times per week.
- Mixing
- Casting
- Curing
- Finished
Watch the Fireplace Surround Come Out of the Mold
Here’s the video of that fireplace surround cast while Jeff was training the team:
The video follows one bucket of fluid PowerBlend, mixed with UltraFibers, from the moment it’s poured into a large U-shaped mold to the moment the finished surround is flipped face-up. There are a few things worth watching for.
First, look at the consistency of the concrete as it leaves the bucket. It flows into the mold and levels itself out without being troweled or packed into place. That fluidity matters for more than speed, because it lets trapped air move freely through the mix instead of getting locked in.
Next, watch the top of the mold after the pour. The surround is cast face-down, so the top of the mold is actually the back of the finished piece. You can see air bubbles rising out of the concrete and breaking at the surface. Every one of those bubbles is moving away from the face, which is exactly where you want it to go.
Finally, watch the close-up after the surround is demolded and flipped. The face that was cast against the mold is dense and smooth, with no pinholes to fill and no slurry coat needed to hide them. On a fireplace surround, where the face is the whole product and the light from the fire rakes across it every evening, that clean surface is what the customer is paying for.
This is a great demonstration of the principles explained in “How to Prevent Pinholes When Direct Casting GFRC”.
How Fairview Uses PowerBlend
Fairview now casts their surrounds with PowerBlend, with UltraFibers added for reinforcement. Because a direct-cast piece like this needs a fluid, self-consolidating consistency, they add extra UltraFlow superplasticizer beyond what’s already in the blend.
When we asked Paul what difference PowerBlend has made, his answer was consistency. Fairview casts all year, and Paul says the mix performs the same in winter as it does in summer. He also credits the way PowerBlend, UltraFibers, and UltraFlow work together, because each one was designed with the others in mind.
Traditional, Modern, and Fully Custom
Because Fairview casts every piece in their own shop, they aren’t limited to a catalog. Their work ranges from a classic white hearth that complements an antique mantel, to a sleek charcoal surround in a contemporary room, to a fully custom wall of wave-textured panels.
- Traditional: a white surround and curved hearth paired with the homeowner’s antique mantel.
- Modern: a clean charcoal surround beneath a wood mantel.
- Fully custom: a fireplace wall of wave-textured cast stone panels.
You can see more of Fairview’s surrounds and hearths at fairviewcaststone.com.
Make Your Concrete With Integrity
Fairview’s surrounds start with the same mix you can order for your own shop. Integrity PowerBlend is engineered by Jeff Girard to give you consistent, dense, pinhole-resistant concrete from bag to bag, so you can spend your time on design and finishing instead of troubleshooting your mix.
