Instructions for How to Apply Omega Pro Concrete Countertop Sealer

Free Training » Sealing » Omega Sealer » Instructions for How to Apply Omega Pro Concrete Countertop Sealer

Welcome to the most thorough and detailed instructions of any sealer on the planet. On this page we provide you with everything you need to be successful with the instructions for Omega Concrete Countertop Sealer. Omega is a professional grade sealer that requires some study and practice. It is essential to watch and read the full documentation before applying the sealer. Give yourself some time to understand the process and to practice on a sample before attempting to seal your first project.

TABLE OF CONTENTS

Information that you should review first:

  • Read the FAQs – MASSIVE AMOUNTS OF INFORMATION ABOUT EVERY QUESTION EVER ASKED ABOUT OMEGA!!! READ THIS!!! The FAQs give answers to questions about all sorts of topics such as what to do if you get dust in your sealer, find any chunks in it, or spill water on it, as well as information about performance against stains, acids, scratches, heat, cold, UV and water.

All of the information:

 


IMPORTANT NOTES

YOU MUST TEST OMEGA ON A TRIAL SAMPLE BEFORE SEALING A REAL PROJECT FOR THE FIRST TIME. Different concrete mix designs, casting techniques, curing regimens, surface processing techniques, environmental conditions, etc. will influence how well Omega is applied and how it looks. 

  • ***Be sure to use an induction time of a full 5 minutes.*** See the written instructions for more information.
  • Threads, lids and tools must be cleaned thoroughly after each use. They are effectively cleaned with water and acetone. Uncured Omega, as well as the liquid Part A and Part B, can be cleaned up by first rinsing with fresh water, and then with a scrub or rinse with acetone. An acetone and water mixture (at least 20% acetone) works too. Acetone will not affect cured Omega, so do not let Omega cure on your tools.
  • Do NOT over-backroll. The surface needs to stay wet. Do NOT continue to backroll once the surface starts to dry out. Pay attention to the amount of backrolling done in the videos.
  • Strain sealer before applying
  • Do not dry grind to prepare the surface. Wet grinding only. You can fix it if you already dry ground. See this article.

Top


WRITTEN INSTRUCTIONS


TRAINING VIDEOS

IMPORTANT: Please read the Written Instructions as well. They contain important information that is not included in these videos.

  1. Summary
  2. Surface Prep
  3. Primer measuring and mixing, induction time
  4. Primer Application
  5. Finish measuring and mixing
  6. Finish Application
  7. Curing
  8. Tips – Blotting a saturated roller, mixing sealer strategy, using Ovation and Omega together, etc.

Top

1. Summary

Don’t stop with just this video! Watch the rest too, and read the Written Instructions.

 List of Videos

2. Surface prep

THIS IS CRITICAL! Please review the important information and videos on this page.

  List of Videos

3. Primer measuring and mixing, induction time

Note that in hot weather, finish coats can be diluted 1:1.25 instead of 1:1, to make back rolling easier. Please see the written instructions for details. Allow the mixed Part A and Part B to rest for 5 minutes prior dilution, not 2 minutes. This is called “induction time”. It is critical that you allow a full 5 minutes, because we have found that shorter induction times result in a higher likelihood of water penetrating the cured sealer.

List of Videos

4: Primer Application

4a. Primer spray bottle method – first prime coat

4b. How to tell when primer is ready

4c: Tip – Rinsing rollers

4d: Primer spray bottle method – second and third prime coats

  List of Videos

5. Finish measuring and mixing

  List of Videos

6. Finish Application

6a. Finish coat spray bottle application

6b. Tip – Avoid over backrolling

6c. Tips for speed drying

6d. Second and third finish coats

6e. Finish coat application on vertical surfaces and integral sinks

6f. Tip – Seal under sink hole

  List of Videos

7. Curing

  List of Videos

8. Tips – Blotting a saturated roller, mixing sealer strategy, using Ovation and Omega together, etc.

  List of Videos

Top


Top

COVERAGE RATES

When measuring by volume:


Omega Coverage Rates

Top

 


 

DOCUMENTATION FOR YOUR CLIENTS

Setting expectations with your clients is critical for any sealer. This starts before the sale and extends to after the sale. By handing out the following documentation to your customers upon installation, you will address any questions they have about how to care for their concrete, prevent problems, and reduce calls to you for simple maintenance that your clients can perform themselves. Click here to download the Omega Care and Maintenance Guide. Click here to download the Omega Scratch Repair instructions.

Top

 


 

DATA SHEETS

Click here to download the Technical Data Sheet. Click here to download the Safety Data Sheet for Part A. Click here to download the Safety Data Sheet for Part B.

Top


 

DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY

The manufacturer solely and expressly warrants that its products shall be free from defects in materials and workmanship. THE MANUFACTURER MAKES NO OTHER WARRANTIES, IMPLIED OR OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR ORDINARY OR PARTICULAR USE OF ITS PRODUCTS. Product descriptions, illustrations, or demonstrations, if any, are for illustration purposes only and do not constitute a warranty or warranty alteration. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED, OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. Upon purchase, handling, storage, and application of products are beyond control of the manufacturer. The manufacturer specifically does not warranty performance results. The purchaser should conduct a test prior to application and shall be solely responsible for determining the suitability of products for the purchaser\’s intended purposes. The manufacturer shall bear no liability, other than the replacement of the defective product. The purchaser shall have no claim for incidental or consequential damages. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sales of our products. This product contains chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW THE PRECAUTIONS TO PREVENT BODILY HARM.

Top